⚠️Due to high demand, processing times are 12-16 days.
Dross:Aviation LogoDross:Aviation
Shop
  • Stratux Devices
  • Sensors
  • Cases
  • Transmission (TX)
  • Antennas
  • Professional Services
StratuxProfessional Services
Comparisons
  • Stratux vs Sentry
  • Stratux vs SkyEcho
  • Stratux vs PowerFLARM
  • Stratux vs Rosetta
FAQ & Guides
DIY Guide
  • First Time Setup
  • Component Checklist
  • Install Firmware
  • Install VFR Charts
  • Calibrate SDR
  • Flash T-Beam
  • Flash T-Motion
  • AHRS & Altitude Sensor
  • Submit to OGN
  • Mobile Data While Connected
  • Garmin Pilot Setup
  • Troubleshooting: WiFi & GPS
  • SkyDemon Setup
  • Stratux Web Interface
Contact
🇬🇧EN🇩🇪DE🇪🇸ES
🇬🇧EN🇩🇪DE🇪🇸ES
  1. Home
  2. Dross:Aviation
  3. FAQ
  4. EFB Apps

EFB App Compatibility Guide

Quick Answer

Which EFB apps work with Stratux?

Stratux works with all major EFB apps via GDL90 protocol: ForeFlight, SkyDemon, EasyVFR, Avare, FlyQ, iFly GPS, and OzRunways. Connect your tablet to the Stratux WiFi network and traffic appears automatically, no configuration required.

See also:GDL90StratuxAHRSADS-BGarmin Pilot

Key Features

iOS & AndroidFull Support
WiFiAuto-Connect
TabletsiPad & Android
GDL90Standard Protocol

What is an EFB?

An Electronic Flight Bag (EFB) is a digital application that replaces paper charts, approach plates, and flight planning materials. Modern EFB apps run on tablets and smartphones, providing moving map navigation, weather overlays and, when connected to a Stratux, real-time traffic display.

Popular EFB apps include SkyDemon (Europe), ForeFlight (worldwide), EasyVFR (Europe), Avare (open-source), FlyQ, and iFly GPS. All these apps support the GDL90 protocol, which is the standard data format Stratux uses to broadcast traffic and GPS information.

Compatible EFB Apps

ForeFlight

Platform: iOS, iPad

Region: Worldwide

Features: IFR/VFR charts, weather, traffic, synthetic vision, flight planning

Setup: Connect to Stratux WiFi, traffic appears automatically

Full ForeFlight walkthrough

SkyDemon

Platform: iOS, Android, Windows

Region: Europe, Australia, South Africa

Features: VFR charts, moving map, traffic overlay, synthetic vision

Setup: Connect to Stratux WiFi, enable 'Receive Traffic' in settings

Full SkyDemon walkthrough

Garmin Pilot

Platform: iOS, iPad, Android

Region: Americas, Europe, Atlantic/Pacific regions

Features: IFR/VFR charts, flight planning, weather, traffic, synthetic vision, logbook

Setup: Connect to Stratux WiFi, then select Stratux in the connected-devices list (version 10.7 and newer)

Full Garmin Pilot walkthrough

VFRnav

Platform: iOS, Android

Region: Europe (Germany, Austria, Switzerland)

Features: VFR charts, ICAO maps, airspace alerts, traffic display

Setup: Connect to Stratux WiFi, enable external traffic in settings

AIP:Aero

Platform: Web (PWA), iOS, Android

Region: 62+ countries (Europe focus, USA and Canada rolling out)

Features: Official AIP charts, VFR moving map with live position, airspace and terrain alerts, glide range ring, flight planning

Setup: Connect to Stratux WiFi, enable GDL90 traffic in settings

New: Ground Station, a free browser-based tower screen for an airfield that merges OGN/FLARM, ADS-B and OpenSky traffic into one approach list. Situational awareness only, not an ATC or separation service.

VFR Moving MapGround Station

EasyVFR

Platform: iOS, Android

Region: Europe

Features: VFR charts, flight planning, NOTAM integration, traffic

Setup: Connect to Stratux WiFi, enable external traffic source

SafeSky

Platform: iOS, Android

Region: Europe

Features: Traffic aggregator: merges your receiver's targets with 14 further sources and feeds them to your EFB

Setup: Preferences - Traffic Sharing: pick your EFB under Navigation and Stratux as the external traffic device

XCSoar

Platform: Android, Windows, Linux

Region: Worldwide (gliding focus)

Features: Open-source glide computer: final glide, airspace, task planning, FLARM traffic

Setup: Config - Devices - Edit: port type TCP Client, 192.168.10.1, port 2000, driver FLARM

Enroute Flight Navigation

Platform: iOS, Android, Linux

Region: Europe

Features: Free, non-commercial VFR navigation by Akaflieg Freiburg; finds the receiver on its own

Setup: Nothing to configure - it detects the Stratux on its WLAN and shows the connection in the main menu

Sky-Map

Platform: iOS, Android, Windows

Region: Europe

Features: Moving map with airspace and traffic display; handles bearingless contacts and AHRS

Setup: Setup - Wireless Interface Setup - Device: Stratux, no password, and let it use the Stratux GPS instead of the tablet's

Airmate

Platform: iOS, Android

Region: Europe, worldwide

Features: Free EFB with flight planning, weather and traffic display

Setup: Set the ADS-B receiver to automatic and the GPS source to Stratux

Avare

Platform: Android

Region: Worldwide (FAA data)

Features: Free, open-source, moving map, traffic display

Setup: Connect to Stratux WiFi, enable GDL90 in preferences

FlyQ EFB

Platform: iOS, Android

Region: USA, Canada, Europe

Features: Charts, weather, traffic, flight planning

Setup: Connect to Stratux WiFi, auto-detects traffic source

iFly GPS

Platform: iOS, Android, Windows

Region: USA

Features: Moving map, geo-referenced approach plates, traffic

Setup: Connect to Stratux WiFi, configure external GPS

OzRunways

Platform: iOS, Android

Region: Australia, New Zealand

Features: Australian VTC/ERC charts, traffic, weather

Setup: Connect to Stratux WiFi, enable in connectivity settings

Why It Matters That the Receiver Does Not Care Which App You Use

A Stratux speaks two published protocols and nothing else. It does not authenticate your app, does not check a subscription and has no opinion about who wrote it. That sounds like a technical detail; over the life of the hardware it is the difference between a receiver you keep and one that retires with a product decision you had no part in.

Trying another app costs nothing

Install it, point it at the same receiver, fly with it for a season. If it does not suit you, go back. No hardware to re-buy, no pairing to undo - the Stratux keeps sending the same data either way.

Several devices at once

GDL90 goes out to every device that joins the network, so the pilot's tablet and a passenger's phone can both follow the same traffic. The one limit is per device: some apps claim the port exclusively, so two EFBs on one tablet may leave the second one empty.

The hardware outlives the subscription

Apps get sold, repriced or discontinued, and chart coverage moves around. None of that reaches a receiver that only ever put bytes on a published protocol - and when a part does fail, it is a standard module you can replace yourself.

What openness does not give you

Worth saying plainly: with a closed bundle, one company owns the whole chain and you have one number to call. Here the integration is yours. That is why these pages carry the exact menu path for each app instead of leaving you to find it.

The one setup step that catches almost everybody

Traffic appears, the connection looks healthy, and the app is still navigating on the tablet's own GPS. Nothing warns you, because from the app's point of view nothing is wrong - it simply never switched sources. Set the Stratux as the position source explicitly, then check the satellite count in the app against the one on the status page. On a WiFi-only tablet it matters twice over: those have no GPS receiver at all, so without the switch there is no position worth the name.

Pre-flight checkStatus pageGDL90NMEA

How to Connect

1

Power on your Stratux and give it about a minute; the stratux WiFi network appears once it has finished booting

2

Open your tablet/phone WiFi settings and connect to the 'stratux' network

3

Open your EFB app: most will auto-detect Stratux and start receiving data

4

If traffic doesn't appear, check your app's settings for 'external traffic source' or 'GDL90' options

Internet Note: While connected to Stratux WiFi, your device won't have internet access. Some EFB apps (like SkyDemon) can be configured to use cellular data for weather while receiving traffic over WiFi.

Troubleshooting

No traffic showing

Ensure WiFi is connected to 'stratux' network. Check that GDL90/external traffic is enabled in your app. Visit 192.168.10.1 to verify Stratux is receiving traffic.

GPS position not updating

Some apps use internal GPS by default. Check settings to enable 'external GPS' or 'Stratux GPS'. Ensure GPS module has clear sky view.

AHRS not working

Enable AHRS in your EFB app settings. Ensure Stratux is mounted level on the glareshield. Some apps require a synthetic vision subscription.

WiFi keeps disconnecting

Disable 'auto-join' for other networks. Some devices prioritize internet-connected networks; disable this in WiFi settings. Ensure Stratux has adequate power.

Frequently Asked Questions

Related Technology Guides

Stratux

Complete anti-collision system guide

GDL90

Traffic data protocol

AHRS

Synthetic vision & attitude

NMEA

GPS navigation data protocol

View all guides

Get Stratux for Your EFB

All our Stratux devices work out of the box with your favorite EFB app. No configuration required, just connect to WiFi and fly.

Compare Stratux ModelsVisit Shop

Disclaimer

Stratux is not certified aviation equipment. It does not replace a transponder or relieve the pilot of traffic awareness responsibilities. Use as supplementary situational awareness only. Dross:Aviation assumes no responsibility or liability for the use of Stratux devices, firmware flashing, or hardware modifications. All DIY guides are provided without warranty: use at your own risk.

Dross:Aviation

© 2026 All rights reserved.

Dross:Network|Alexander Dross|Dross:Media|Dross:Air|Blog|AIP:Aero|Trade:Aero
Shop|Services|Guides|Comparisons|DIY|Sitemap
Newsletter|Legal|Privacy|Imprint|Contact