Use Mobile Data While Connected to Stratux (WiFi Direct)

Keep your phone's internet (cellular / mobile data) alive while it is connected to the Stratux WiFi

When you connect an Android phone to the standard Stratux WiFi access point, the phone notices the network has no internet and normally shuts off mobile data - so weather, notifications and other online apps stop working. Switching the Stratux to WiFi Direct lets the phone stay paired with the Stratux while keeping mobile data (and even a second WiFi network) active at the same time.

1. On the Stratux

  1. 1Open the Stratux web interface at http://192.168.10.1 and go to Settings.
  2. 2Change the WiFi mode from "Classic AP" (the default) to "Wifi Direct".
  3. 3Set an 8-digit PIN - you will need it to pair the phone.
  4. 4Save and reboot. The Stratux now advertises a WiFi Direct host plus a fallback access point named "DIRECT-xxx".

2. On the Android Phone

  1. 1Open the WiFi settings and open the extended / advanced menu (the exact location depends on your Android version and manufacturer).
  2. 2Select "Wi-Fi Direct" and choose your Stratux by its device name.
  3. 3Enter the 8-digit PIN you set on the Stratux to pair.
  4. 4Your EFB app can now reach the Stratux while mobile data stays on. Note: unlike a classic WiFi, WiFi Direct does not auto-connect - you re-pair it each time you fly.

What you gain

  • Mobile data (cellular internet) stays active while connected to the Stratux.
  • You can additionally join a normal WiFi network, as long as it uses a different IP range than the Stratux.

Original source: Stratux "Wifi Direct and Android mobile data" wiki