Submit Your Stratux to OGN (Open Glider Network)

Register your Stratux 3 or standalone FLARM/softRF dongle with the Open Glider Network

This section explains how to add your Stratux 3 or standalone FLARM/softRF dongle (capable of transmitting your aircraft's position) to the Open Glider Network (OGN).

It is recommended to submit your Stratux to the OGN Device Database - we can do that for you, too, if you tell us the callsign of your aircraft.

1. Get your OGN Tracker HEX ID

Stratux using T-Beam (ESP32)

  1. aView the status display, or open the web interface at http://192.168.10.1 > Settings > OGN Tracker > Tracker Address (HEX).
  2. bOpen the web interface at http://192.168.10.1 > Settings > Configuration > Ownship Mode - usually the Stratux HEX ID is listed here.
  3. cIf you use a "Classic Stratux 3", a WiFi named "SoftRF-xxxxx" appears, where xxxxx is the HEX ID of the T-Beam that sends your aircraft's position to others; it should be placed in the input field shown below.
Insert the T-Beam's HEX ID into the Stratux web interface, to prevent seeing your own position

Standalone FLARM/softRF dongle, using T-Motion (STM32)

View the status display to read the Tracker Address (HEX).

2. Create an OGN Device Database account

Create an OGN Device Database account, then Add Device and use the Tracker Address (HEX) for the Device ID.

Open OGN Device Database