How to Flash softRF T-Motion (STM32)
Program the compact T-Motion board for OGN/FLARM transmission
This section provides step-by-step instructions on how to properly flash the softRF TTGO T-Motion from LilyGo - so you can use it as a standalone softRF dongle or to extend your existing Stratux anti-collision system to send your aircraft's position to other receivers.
Please note that the T-Motion does not come with WiFi or Bluetooth. You must use the serial port to flash the firmware. Instructions below are provided "as is" with no express or implied guarantee.
Choose your flashing method
- 1Option 1 (preferred) - use STM32CubeProgrammer to flash another firmware to softRF (T-Motion).
- 2Option 2 (legacy) - first update the USB driver to make the device findable for DfuSe, then use DfuSe to flash another firmware to softRF (T-Motion).
- 3Finally, configure and select the transmitting protocol for softRF (T-Motion).
By using our products, you acknowledge that you agree to our terms and conditions and disclaimer. Please note that we do not provide any guarantee on hardware which is flashed or modified by the customer.