⚠️Due to high demand, processing times are 12-16 days.
Dross:Aviation LogoDross:Aviation
Shop
  • Stratux Devices
  • Sensors
  • Cases
  • Transmission (TX)
  • Antennas
  • Professional Services
StratuxProfessional Services
Comparisons
  • Stratux vs Sentry
  • Stratux vs SkyEcho
  • Stratux vs PowerFLARM
  • Stratux vs Rosetta
FAQ & Guides
DIY Guide
  • First Time Setup
  • Component Checklist
  • Install Firmware
  • Install VFR Charts
  • Calibrate SDR
  • Flash T-Beam
  • Flash T-Motion
  • AHRS & Altitude Sensor
  • Submit to OGN
  • Mobile Data While Connected
  • Garmin Pilot Setup
  • Troubleshooting: WiFi & GPS
  • SkyDemon Setup
  • Stratux Web Interface
Contact
🇬🇧EN🇩🇪DE🇪🇸ES
🇬🇧EN🇩🇪DE🇪🇸ES
  1. Home
  2. Dross:Aviation
  3. DIY Guide
  4. Install Firmware

How to Install Stratux EU/US Firmware

Flash the correct firmware to your SD card

This guide shows you how to download and install Stratux firmware on your SD card. Choose between the EU version (with FLARM support) or the US version (with UAT support) based on your region.

Prefer a ready-to-fly SD card?

Skip the flashing process entirely and buy a pre-configured SD card with the latest Stratux firmware instead: just insert and fly, no technical setup required.

Buy Pre-configured SD Card

Firmware Versions

EU

Stratux EU

European version with FLARM, OGN, ADS-L, FANET, and PAW support. Optimized for 868MHz reception.

GitHub ReleasesWeb Interface Guide
US

Stratux US

US version with UAT (978MHz) support for FIS-B weather and TIS-B traffic.

GitHub Releases
Advanced

Roastbeef (Advanced)

Advanced alternative firmware with additional features and optimizations. Recommended for experienced users who want extended functionality.

GitHub ReleasesRoastbeef WikiWeb Interface Guide

What You Need

  • MicroSD card (16GB or larger recommended)
  • SD card reader for your computer
  • Balena Etcher or Raspberry Pi Imager software
  • Stable internet connection for download
1

Download Balena Etcher

Download and install Balena Etcher. This free tool works on Windows, macOS, and Linux. Alternatively, you can use Raspberry Pi Imager.

Balena Etcher
2

Download Stratux Firmware

Go to the GitHub releases page for your region (EU or US) and download the latest .img or .img.zip file. The EU version is maintained by b3nn0, the US version by cyoung.

3

Insert SD Card

Insert your microSD card into your computer using an SD card reader. Make sure the card is empty or backed up - all data will be erased during flashing. It's recommended to format the SD card to FAT32 first using the official SD Card Formatter tool.

SD Card Formatter
4

Flash the Image

Open Balena Etcher, click 'Flash from file' and select the downloaded Stratux image. Select your SD card as the target, then click 'Flash!'. The process takes 5-10 minutes.

5

Verify and Eject

Etcher will automatically verify the flash. Once complete, safely eject the SD card from your computer. The card is now ready to use in your Stratux.

6

Insert into Stratux

Insert the flashed SD card into your Raspberry Pi. Connect power and wait for the device to boot. You should see the 'stratux' WiFi network appear within 60 seconds.

Important Notes

  • Always use a high-quality SD card (Class 10 or better) to prevent corruption
  • The EU firmware requires different SDR calibration than US firmware
  • Keep a backup of your SD card image after configuration

Next Steps

First Time SetupCalibrate SDRInstall VFR Charts

Related Technology Guides

Stratux

Complete anti-collision system guide

Web Interface

Configure your Stratux at 192.168.10.1

EFB Apps

SkyDemon, ForeFlight compatibility

View all guides
Dross:Aviation

© 2026 All rights reserved.

Dross:Network|Alexander Dross|Dross:Media|Dross:Air|Blog|AIP:Aero|Trade:Aero
Shop|Services|Guides|Comparisons|DIY|Sitemap
Newsletter|Legal|Privacy|Imprint|Contact