⚠️Due to high demand, processing times are 12-16 days.
Dross:Aviation LogoDross:Aviation
Shop
  • Stratux Devices
  • Sensors
  • Cases
  • Transmission (TX)
  • Antennas
  • Professional Services
StratuxProfessional Services
Comparisons
  • Stratux vs Sentry
  • Stratux vs SkyEcho
  • Stratux vs PowerFLARM
  • Stratux vs Rosetta
FAQ & Guides
DIY Guide
  • First Time Setup
  • Component Checklist
  • Install Firmware
  • Install VFR Charts
  • Calibrate SDR
  • Flash T-Beam
  • Flash T-Motion
  • AHRS & Altitude Sensor
  • Submit to OGN
  • Mobile Data While Connected
  • Garmin Pilot Setup
  • Troubleshooting: WiFi & GPS
  • SkyDemon Setup
  • Stratux Web Interface
Contact
🇬🇧EN🇩🇪DE🇪🇸ES
🇬🇧EN🇩🇪DE🇪🇸ES
  1. Home
  2. Dross:Aviation
  3. Shop
  4. Stratux AHRS Sensor Board - ICM-20948 & BMP380
Stratux AHRS Sensor Board - ICM-20948 & BMP380 - AHRS sensor board designed to fit US-style Stratux cases

Fixes T-Beam power dropouts

Two senders overload the Pi's shared ~1,200 mA USB budget, so the T-Beam drops out after a few minutes, especially on a Dual Pro. This is the only sensor board that fixes the root cause: it keeps the sender power off that budget and smooths the current draw during transmit peaks, so two T-Beams and two SDRs run without dropouts.

Sensors

Stratux AHRS Sensor Board - ICM-20948 & BMP380

Complete AHRS sensor board designed specifically to fit US-style Stratux cases. Choose between ICM-20948, MPU9250, MPU9255, or GY91 AHRS sensor options, all combined with BMP280 barometric pressure sensor. Perfect for US Stratux builds or case replacements. Running two senders on a Raspberry Pi pushes its shared USB budget (around 1,200 mA) to the limit, and LoRa transmit peaks can tip it over, causing dropouts in a Stratux Dual Pro. This is the only sensor board that fixes the root cause: it keeps the sender power off the Pi's USB budget and smooths the current draw during transmit peaks, so two T-Beams and two SDRs run without disconnects, with no cable surgery and no external power mods. Just plug it in and fly.

19,90 € – 29,90 €

incl. VAT, plus shipping

Features

  • Fits US-style Stratux cases
  • Multiple AHRS sensor options
  • BMP280 pressure sensor included
  • Pre-wired connections
  • Clear mounting instructions
  • Fixes T-Beam dropouts on Stratux Pro & Dual Pro
  • Runs two T-Beams and two SDRs without USB overload
  • Plug & play - no cable cutting or external power mods

Technical Specifications

Sensor interface
I2C via GPIO header
Sender power
Kept off the Pi's shared USB budget
Capacity
Two T-Beams + two SDRs, no dropouts
Compatibility
Stratux Classic, Pro, Dual Pro; Pi 3B / Pi 4
Data path
Unchanged, serial over USB
In StockMultiple Options Available

Shipping Costs

Ships as: Large Envelope€5.30

Large-letter box, 230 × 160 × 20 mm (DIN A5)

no tracking

incl. €3.50 service charge per parcel
All shipping rates
  • Standard Envelope€4.45

    SD cards

  • Large Envelope€5.30

    Sensor boards, Dongle Edition

  • Maxi Envelope€9.69

    Stratux cases

  • Package S€9.69

    Complete Stratux units (Standard, Classic, Pro, Dual Pro), assembled antenna mount

Carrier: DHL / Deutsche Post worldwide

Processing: 12–16 days (a spare-time hobby, built on demand) plus DHL / Deutsche Post transit

Prices are Deutsche Post / DHL 2026 rates.

Payment Methods

Credit & Debit Cards

Visa, Mastercard, American Express

VISAMCAMEX

SEPA Direct Debit

Pay by IBAN mandate (SEPA, EUR)

Secure Payment

All transactions secured with Stripe 3D Secure

All prices include VAT; the rate for your country is applied at checkout

Reverse charge for verified EU businesses with a valid VAT ID at checkout

Manufacturer & Safety Information

Manufacturer / EU responsible person (GPSR)

Alexander Dross
mail@drossaviation.com (via our contact form)
Full postal address: Imprint

Safety information

  • Stratux is an experimental, non-certified device for situational awareness only. It does not replace certified avionics, a transponder or an approved collision-avoidance system.
  • Electrical device: power it only from a suitable 5 V USB source. Connecting it to the aircraft's electrical system is at your own risk (risk of overvoltage).
  • Contains small parts and electronics; keep away from children under 3 years.
  • Assemble and operate only as described in our guides; improper handling can damage the hardware and voids the voluntary manufacturer's guarantee.

Disposal of electrical equipment

This is an electrical device. Do not dispose of it in household waste at the end of its life; hand it in free of charge at a municipal collection point for waste electrical and electronic equipment (crossed-out wheelie-bin symbol).

Relevant Guides & Tutorials

AHRS GuideAHRS features & calibrationDIY: AHRS & Altitude SensorInstall attitude & altitude sensorsStratux OverviewCompare all Stratux models

Frequently Asked Questions

Related Products

Latest Generation: Stratux AHRS Sensor ICM-20948 - 9-axis AHRS sensor for artificial horizon display

Latest Generation: Stratux AHRS Sensor ICM-20948

44,99 €

incl. VAT

Stratux AHRS Sensor GY-91 MPU-9250 + BMP280 - Combined AHRS and pressure sensor board

Stratux AHRS Sensor GY-91 MPU-9250 + BMP280

10,99 €

incl. VAT

Stratux AHRS Sensor GY-MPU9255 - 9-axis AHRS sensor module

Stratux AHRS Sensor GY-MPU9255

10,99 €

incl. VAT

Barometric Pressure Altitude Sensor for Stratux BMP280 - Pressure altitude sensor module

Barometric Pressure Altitude Sensor for Stratux BMP280

6,50 €

incl. VAT

Disclaimer

Stratux is not certified aviation equipment. It does not replace a transponder or relieve the pilot of traffic awareness responsibilities. Use as supplementary situational awareness only. Dross:Aviation assumes no responsibility or liability for the use of Stratux devices, firmware flashing, or hardware modifications. All DIY guides are provided without warranty: use at your own risk.

Stratux AHRS Sensor Board - ICM-20948 & BMP380

19,90 € – 29,90 €

Dross:Aviation

© 2026 All rights reserved.

Dross:Network|Alexander Dross|Dross:Media|Dross:Air|Blog|AIP:Aero|Trade:Aero
Shop|Services|Guides|Comparisons|DIY|Sitemap
Newsletter|Legal|Privacy|Imprint|Contact